CO Alarm 12/24V DC with Interconnect - Black Ā
A Carbon Monoxide (CO) detector should be installed in each accommodation space. Ā Small crafts or RV's with an open design may require only one (1) detector for adequate protection. Ā If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces.
The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels. Ā Using a āTime Weighted Averageā (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb). Ā COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage. Ā The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream.Ā
The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response.
*Long sensor life ā approximately 7 year end-of-life (EOL)
Features:
- Interconnect up to ten (10) CO alarms - all connected CO alarms sound togetherĀ
- Microprocessor controlled
- Compact design for inconspicuous protection
- Time-weighted average CO measurement process constantly monitors all CO levels
- Highly resistant to most chemicals, solvents & cleaners
- CMD6-MD 12/24V DC model uses boat power and has permanent internal backup Lithium-metal batteries
Technical Specifications:
- Power Usage - 4 mA
- Alarm Point - 10% COHb
- Alarm Horn - 85 dBA
- Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm)
- Interconnect Functionality - Yes
*Sold as an IndividualĀ
Manufacturer : Fireboy-Xintex
Manufacturer Part No : CMD6-MDR-R
UPC : 619749208853