The NVS 27M is Newcon Optik’s most advanced night vision clip-on to date and represents a significant improvement on other clip-on systems currently available. Utilizing any of Newcon Optik’s AG or AGBW IIT systems, this high-resolution unit is designed to mount in front of virtually any daytime riflescope. It differs from the competition in many ways, but primarily in its compatibility with day sight magnifications between 1x and 20x. As military and police shooters continue to use higher magnification day sights, this compatibility range provides a significant advantage in the field, enabling the use of most, if not all, of a given day sight’s magnification capability.
The NVS 27M was designed by shooters, and its extra wide field of view, manual gain control system and extended target detection range make it the world’s most complete night vision clip-on system.
FEATURES:
Battle ready |
No re-zeroing required |
Easy to operate |
QR mount system |
SPECIFICATION:
Generation |
3 |
Photocathode material |
GaAs |
IIT resolution, minimum (lp/mm) |
64 |
Figure of merit, minimum |
1600 |
Signal to noise ratio, minimum |
25 |
Mean time to failure (hours) | 10,000 |
Photocathode sensitivity, minimum (μA/lm) | 1800 |
Auto-gating | Yes |
Auto-gating with black & white phosphor |
Optional |
Automatic Brightness Control | Yes |
Optics | |
Magnification (x) |
1 |
Field of view (°) |
13 |
Objective F# |
1.5 |
Objective focal length (mm) |
78 |
Focus range (m) |
10 to ∞ |
Magnification compatibility, recommended (x) |
1 – 20 |
Mechanics, Electronics & Environmental | |
Dimensions (mm) |
220x95x73 |
Weight without batteries or objective lens cap (g) |
934 |
Mount system |
QR Mount |
Height from the rail to the optical axis (mm) | 42 |
Height from the rail to the optical axis (inches) | 1.65 |
IR illuminator | Optional |
Battery type |
1x AA or 1x CR123 |
Battery life (hours) |
50 |
Low battery indicator | Yes |
Operating temperature range (°C) |
-45 to +65 |
Storage temperature range (°C) |
-50 to +70 |
Waterproofing |
MIL-STD-810G |
Environmental protection compliance |
MIL-STD-810G |
Boresight retention | Permanent |
Boresight adjustment | Not required |