RovyVon Aurora A1XGRY Polymer EDC Flashlight - 650 Lumens

The upgraded Aurora A1x equipped with CREE XP-G3 Cool White LED, the CREE delivers max 650 lumens. The optimized board helped with performance on PWM control and battery run time, the battery capacity also improved to 330mAh which increases the run time as well. A new user interface makes the operation easier and more user-friendly.

Levels:
High:     650 lumens - 1.5mins+75mins
Medium:  360 lumens - 1.5mins-95mins
Low:       20 lumens - 8 hours
Moonlight: 2 lumens - 30 hours

    Lightweight and portable
    Made of Polyamide, lightweight and durable
    CREE XP-G3 LED, max output 650 lumens
    330mAh lithium-polymer battery
    Micro USB charging with indicator, fully charged in 90 minutes
    One-handed operation friendly side switch
    Momentary On & Hidden Strobe
    Reversible two-way pocket clip
    Equivalent IP66 weather resistance

Material: Polyamide
Dimensions
Length:  60.5mm / 2.38”
Diameter: 15.6mm / 0.61”
Weight: 16.8g / 0.59oz
Battery: 330mAh Li-po rechargeable
Charging: Micro USB
Charging indicator: Breathing blue is in charge, solid blue is fully charged.
Charging time: Approx 90 minutes
Accessory
1*User manual, 1*Key ring, 1*Pocket clip, 1*USB cable, 1*Warranty card

1. Illumination
Momentary On: Press and hold (High), release to turn off
Constantly on: Double click (default from memory mode)
Switch modes: Click to cycle through Ultra low-Low-Medium-High
Turn Off:
1) Long-press 0.3s;
2) Working at any mode over 3 minutes, click to turn off
Memory: Working on a mode over 3 minutes.
2. Strobe
Turn ON
a. From off, triple-click
b. From any mode of Illumination, triple-click
Turn Off: Single click

*Note: The max output 650 lumens at High mode will step down to 100 lumens in 1 and half a minute to protect the user and the core components of the light from the heat generated by the light working at High mode and medium mode.